Certain fractional calculus and integral transform results of incomplete ℵ-functions with applications

In this paper, we study certain interesting and useful properties of incomplete $\aleph$-functions. The incomplete $\aleph$-function is an extension of the $\aleph$-function. We find several useful classical integral transforms of these functions. Further, we examine the fractional calculus with the incomplete $\aleph$-functions and point out several special cases. Finally, we give the applications of incomplete $\aleph$-functions in detecting glucose supply in human blood.     

3D‐morphology reconstruction of nanoscale phase‐separation in polymer memory blends

In many organic electronic devices functionality is achieved by blending two or more materials, typically polymers or molecules, with distinctly different optical or electrical properties in a single film. The local scale morphology of such blends is vital for the device performance. Here, a simple approach to study the full 3D morphology of phase‐separated blends, taking advantage of the possibility to selectively dissolve the different components is introduced. This method is applied in combination with AFM to investigate a blend of a semiconducting and ferroelectric polymer typically used as active layer in organic ferroelectric resistive switches. It is found that the blend consists of a ferroelectric matrix with three types of embedded semiconductor domains and a thin wetting layer at the bottom electrode. Statistical analysis of the obtained images excludes the presence of a fourth type of domains. The criteria for the applicability of the presented technique are discussed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1231–1237     

Low-temperature formation and characterization of Cu2O nanoparticles in the binary gold alloys

Thermal analyses, using differential scanning calorimetry (DSC) and dilatometry, reveal an important anomaly at low temperature for Au-25 wt.% Cu composition after homogenization at 700°C during 2 hours under vacuum followed by heating up to 160°C before water quenching. This anomaly has been already observed and not explained. Surface characterization, using scanning electron microscopy (SEM), atomic force microscopy (AFM), and scanning tunneling microscopy (STM), exhibits a specific topography, consisting of a nanostructured surface. The precipitates of nanostructured particles are homogeneously scattered all over the surface for this 18-carat gold alloy. Moreover, X-ray photoelectron spectroscopy (XPS) shows that the composition of the observed particles corresponds to cuprous oxide phase (Cu₂O). The formation of such material can be explained by the diffusion of copper atoms from the lattice to the surface at 160°C. Pulsed radio-frequency glow discharge optical emission spectroscopy (RF GD-OES) further proves the proposed Cu₂O formation through a diffusion process. The appearance of such cuprous oxide nanoparticles on the Au-Cu alloy surface explains the low-temperature DSC and dilatometry anomaly and affects directly the surface electrical resistance at low temperature. These results might open a large gate for new ideas to investigate in catalytic, electronic, and antimicrobial activities.     

Surface and structural analysis of epitaxial La1−xSrx (Mn1−yCoy)zO3 films

In the present study were studied the ferromagnetic La_1−xSr_x (Mn_1−yCo_y)_zO₃ (LSMCO) films with Co content y = 0 to 0.18, grown on LaAlO₃ substrates by advantageous pulsed-injection metalorganic chemical vapor deposition technique. The LSMCO films exhibit negative colossal magnetoresistance effect; therefore, they are interesting as potential material for the applications in magnetic field sensing. The changes of lattice volume in the investigated LSMCO films were monitored by X-ray diffraction measurements revealing a transition from tensile to compressive strain with increase of Co content. Additionally, from the atomic force microscopy images, the surface smoothening with increase of y was determined. Despite the reduction of the out-of-plane lattice parameter of LSMCO, the increase of lattice volume in the whole Co-doping range was observed. The X-ray photoelectron spectroscopy combined with Ar⁺ ion sputtering was used for the investigation of chemical composition of the LSMCO films and demonstrated the change and redistribution of oxidation states of Mn and Co on the surface and in the volume of the films. Regardless of the structural changes and charge distribution of Co and Mn cations, epitaxial LSMCO exhibits ferromagnetic properties and magnetoresistance values increases with augmenting Co content in the range of y = 0 to 0.18.     

Atomic force microscopy study of polypropylene-based self-reinforced composites

Self-reinforced composites are polymeric materials formed by a reinforcement core and a low-melting point skin, which acts as a matrix after the consolidation step. These materials are widely exploited in industrial applications for their mechanical resistance and durability, which are themselves influenced by processing conditions and polymer composition. In the present work, two similar polypropylene-based commercial fabrics were used to evaluate the surface modifications after laminate compaction and after artificial aging using atomic force microscopy. The results were correlated with the chemical and physical-chemical interactions obtained from scanning electron microscopy, transmission electron microscopy, raman and thermal analysis experiments. Single tape consolidated laminate before and after aging displayed different superficial features that can explain the differences in the macroscopic behavior of the two products.     

Effect of multi-frequency power ultrasound (MFPU) treatment on enzyme hydrolysis of casein

Effect of multi-frequency power ultrasound (MFPU) pretreatments on the degree of hydrolysis (DH) and mechanism of casein during alcalase enzymolysis was investigated. Results showed that MFPU pretreatment in tri-frequency 20/40/60 kHz mode significantly (p < 0.05) improved the DH value of casein. Variation of intrinsic fluorescence spectrum indicated the unfolding and degradation of casein occurred after MFPU pretreatment. Fourier transform infrared spectra showed that α-helix and β-sheet content of MFPU pretreated casein decreased, while β-turn and random coil content increased. Surface topography and nanostructures of caseins were found modified after MFPU pretreatments by the analysis of scanning electron microscopy (SEM) and atomic force microscopy (AFM). The SEM analysis also indicated that the enzymolysis residues of casein pretreated by MFPU were smaller than untreated samples. In conclusion, the MFPU can be used as an efficient pretreatment method to promote the enzymolysis of casein.     

Interactions of DNA with graphene and sensing applications of graphene field-effect transistor devices: A review

Graphene field-effect transistors (GFET) have emerged as powerful detection platforms enabled by the advent of chemical vapor deposition (CVD) production of the unique atomically thin 2D material on a large scale. DNA aptamers, short target-specific oligonucleotides, are excellent sensor moieties for GFETs due to their strong affinity to graphene, relatively short chain-length, selectivity, and a high degree of analyte variability. However, the interaction between DNA and graphene is not fully understood, leading to questions about the structure of surface-bound DNA, including the morphology of DNA nanostructures and the nature of the electronic response seen from analyte binding. This review critically evaluates recent insights into the nature of the DNA graphene interaction and its affect on sensor viability for DNA, small molecules, and proteins with respect to previously established sensing methods. We first discuss the sorption of DNA to graphene to introduce the interactions and forces acting in DNA based GFET devices and how these forces can potentially affect the performance of increasingly popular DNA aptamers and even future DNA nanostructures as sensor substrates. Next, we discuss the novel use of GFETs to detect DNA and the underlying electronic phenomena that are typically used as benchmarks for characterizing the analyte response of these devices. Finally, we address the use of DNA aptamers to increase the selectivity of GFET sensors for small molecules and proteins and compare them with other, state of the art, detection methods.     

Numerical approximation of AR‐XPS spectra for rough surfaces considering the effect of electron shadowing

A computational scheme is presented that takes into account the topography, i.e. the shadowing and hence the local emission angle of the electrons when evaluating AR‐XPS data of macroscopic rough surfaces. The topography of the sample surface is supposed to be recorded by atomic force microscopy and/or optical microscopy. The emitted photoelectrons are simulated based on an extension of the Beer–Lambert law that includes the shadowing, the current local emission angle, and the geometrical instrument setup. The obtained angle‐resolved XPS spectra are optimized in accordance with experimental ones via a self‐consistent minimization algorithm that also allows one to determine the layer thicknesses of the corrugated sample. In order to validate the proposed numerical scheme, the simulation program simulation of electron spectra for surface analysis is used. An additional analysis is then performed considering only experimental data. The numerical scheme gives good agreement in simulation–simulation as well as simulation–experiment comparisons and permits a comprehensible interpretation of the measured data. Copyright © 2014 John Wiley & Sons, Ltd.     

Mechanical polishing,surface roughness,near‐surface deformation,and electrochemical corrosion of Alloy 690TT

The effects of mechanical grinding/polishing, surface roughness, and near‐surface deformation on the electrochemical corrosion behavior of thermally treated (TT) Alloy 690 were studied in a sodium chloride solution. The X‐ray photoelectron spectroscopy and transmission electron microscopy analyses revealed that mechanical grinding/polishing can change the ratio of the elements at the surface of the as‐received Alloy 690TT specimen by removing its Cr‐rich outer layer and causing deformation at the near‐surface microstructure, something which has a direct impact on the rate of the oxygen reduction reaction (ORR), the pitting potential (E_pit), and the corrosion potential (E_corr) of Alloy 690TT. It was observed that the ratio of Cr in the surface is a significant factor that controls the rate of the ORR and the corrosion parameters such as E_corr. Higher amounts of Cr at the surface accelerate the ORR. The near‐surface deformation shifts the E_pit values towards less positive potentials. It was also found that due to the different near‐surface chemical composition of the as‐received Alloy 690TT specimen compared with the ground and the polished specimens, the surface roughness parameters do not have a regular correlation with the rate of the ORR and the values of the E_corr and the E_pit. Only the passive current density increases when the surface roughness is increased. Copyright © 2015 John Wiley & Sons, Ltd.     

Natural and artificial light-harvesting systems utilizing the functions of carotenoids

Carotenoids are essential pigments in natural photosynthesis. They absorb in the blue–green region of the solar spectrum and transfer the absorbed energy to (bacterio-)chlorophylls, and so expand the wavelength range of light that is able to drive photosynthesis. This process is an example of singlet–singlet energy transfer and so carotenoids serve to enhance the overall efficiency of photosynthetic light reactions. Carotenoids also act to protect photosynthetic organisms from the harmful effects of excess exposure to light. In this case, triplet–triplet energy transfer from (bacterio-)chlorophyll to carotenoid plays a key role in this photoprotective reaction. In the light-harvesting pigment–protein complexes from purple photosynthetic bacteria and chlorophytes, carotenoids have an additional role, namely the structural stabilization of those complexes. In this article we review what is currently known about how carotenoids discharge these functions. The molecular architecture of photosynthetic systems will be outlined to provide a basis from which to describe the photochemistry of carotenoids, which underlies most of their important functions in photosynthesis. Then, the possibility to utilize the functions of carotenoids in artificial photosynthetic light-harvesting systems will be discussed. Some examples of the model systems are introduced.